Multichannel Systems MEA2100-HE2x60 - Manual (Page 2)

© 2012 Multi Channel Systems MCS GmbH
4. Remove the perfusion element together with the tubes.
Do not clean the plexiglass with alcohol!
5. Unscrew the twelve screws (M2 x 4) which fix the heating element on the ground plate.
6. Remove the heating element together with cable and connector.
Outlet Inlet
3. Unscrew the twelve screws (M2 x 4) which fix the perfusion element on the ground plate.
MEA2100-PE2x60 / MEA2100-HE2x60
Perfusion Element / Heating Element
Instructions for the Replacement of the Perfusion Element and / or Heating Element
of the MEA2100-System Headstage MEA2100-HS2x60.