Multichannel Systems Wireless Headstages - Manual (Page 3)

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2014 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
W4-Headstage
Pin Layout of the 4-Channel Headstage for the Wireless Recording System
multi
channel
systems
*
Please orientate the headstage
as shown in the diagram.
Pin Layout of the single row precession socket
(1.27 mm, round pin).
Channel 1
Channel 2
Channel 3
Channel 4
REF (Reference)
GND (Ground)
W4-Headstage top side:
The white connector is for the storage battery.
Please use this connector for orientation of the
headstage.
Connector for W4-Headstage
The connector mates with a standard
single row 1.27 mm pin connector such as:
preci-dip 850-10-006-10-001101
W4-Headstage with single row socket
Diagram of the bottom side with pin layout:
GND REF 4 3 2 1
W4-Headstage bottom side:
Connector for the electrode probe
or for the ME/W-Signal generator
Storage battery connector
on the opposite side
for orientation.