Multichannel Systems ME-System Manual User Manual
Page 7

Important Information and Instructions
7
Electromagnetic compatibility of the MC_Card
The MC_Card data acquisition board is only intended for research work in laboratories.
It belongs to product class 0 conforming to the European Product Regulations and the
CE (Conformité Européenne) marking. The MC_Card complies with all applicable directives
specified in the Council Directive for Electromagnetic Compatibility (89/336/EU).
Requirements for the installation
The MC_Card is only suitable for extra-low voltages and shall be used only as specified.
The equipment shall be correctly earthed or connected to ground.
The analog inputs should be closed or connected to active signals.
Connections to all inputs and outputs shall be made with screened cables specified by
Multi Channel Systems. The screen has to be connected to a solid earth or chassis connection.
ESD voltages at open lines may cause malfunction during operation.
The products shall only be operated from approved power packs (if necessary).