beautypg.com

Multichannel Systems PGA Manual User Manual

Page 25

background image

Appendix

21


Accessories

Product

Product
Number

Description

Power supply with
40 W power and
± 7 V output voltage

PS40W

For supplying power to programmable gain
amplifiers, for custom setups that lack an internal
power supply, or for other custom applications.

32-Channel Cactus
Needle Adapter

ADPT-CN-32

Allows a direct connection of electrodes with cactus
needles to a 32-channel miniature preamplifier
MPA32I.

NeuroNexus Probe
adapters for 16, 32,
or 54 channels

ADPT-NN-16

ADPT-NN-32

ADPT-NN-54

The 16-Electrode NeuroNexus Probe Adapter allows
a direct connection of 16-Electrode acute probes
from NeuroNexus Technologies to two 8-channel
miniature preamplifiers MPA8I.

The 32-Electrode NeuroNexus Probe Adapter allows
a direct connection of 32-Electrode acute probes
from NeuroNexus Technologies to a 32-channel
miniature preamplifier MPA32I.

The 54-Electrode NeuroNexus Probe Adapter allows
a direct connection of 54-Electrode acute probes
from NeuroNexus Technologies to two
32-channel miniature preamplifiers MPA32I.

Signal collector for
8 x MPA8I

SC8x8

Collects the 8 channels from each of the up to
8 miniature preamplifiers MPA8I and leads them
to the amplifier via a 68-pin MCS standard cable.

Signal collector for
2 x MPA32I

SC2x32

Collects the 32 channels from each of the up to
2 miniature preamplifiers MPA32I and leads them
to the amplifier via a 68-pin MCS standard cable.

Signal collector with
blanking circuit for
8 x MPA8I

SC8x8BC

Collects the 8 channels from each of the up to
8 miniature preamplifiers MPA8I and leads them
to the amplifier via a 68-pin MCS standard cable,
the voltage outputs are held constant during the
TTL blanking signal, stimulus artifacts are avoided.

Signal dividers with
16, 32, or 64 channels

SD16, SD32,
SD64

Placed between amplifier and MC_Card, permits to
select any channel, does not interfere with the data
acquisition.

Signal grounding unit

GND64

For silencing defective electrodes. Single channels can
be switched off with small toggle switches. Inputs not
in use are grounded.