Multichannel Systems nanoZ manual - Manual (Page 16)

nanoZ User Manual
12
If the Statistics checkbox is checked, then the average impedance magnitude
and phase ± standard deviation of all tested sites is shown at the bottom of each
column. Note that if the Condition checkbox is checked, only ʻnormalʼ sites are
included in these aggregate statistics.
If the Condition checkbox is checked then shorted site impedance values are
highlighted in red on the spreadsheet and Probe layout window. Open sites are
highlighted in blue. Normal sites are displayed in green.
The report can be saved to file by clicking the icon in the Report window, or
selecting File | Save report from the main menu. Data are saved in tab-delimited
ASCII format according to the current checkbox settings (i.e. phase information
will be exported only if the Phase checkbox is checked, aggregate statistics are
exported according to the Statistics checkbox, etc).