Multichannel Systems MEA-IT Manual - Manual (Page 20)

Impedance Testing Device MEA-IT Manual
16
Click the "Ranges" button.
In the "Ranges" tab, the default settings for the evaluation of a MEA can be changed.
The MEA-IT software uses default reference values to evaluate whether a measured
impedance is all right or out of the acceptable range for the selected electrode type.
This evaluation is displayed in an intuitive color code.
To change the default reference parameters, select a layout and click on the reference value
you want to modify.
Enter the new value in the pop up window. To restore the default values,
use the “Default Values and Colors” button.
The relative limits for outliers and the comparison with previous measurements can be changed
in similar way.
It is also possible to change the default colors. Right-click on a color of the color bar and you can
select user defined colors.