Multichannel Systems MEA-VMT Manual - Manual (Page 14)

MEA-VMT Manual
14
Use the “Stop Camera” command to assign a software instance to a different camera. Already
assigned cameras will not be available.
The MEA-Monitor software offers only the most basic functions which are needed in routine
work with slices or cells on MEAs. It is possible to save the actual image. You can fit the image
automatically to the window or set the screen size to full or half the actual size. The actual
picture size in pixels can be selected from a drop-down menu. The image can be rotated in
both directions, the current rotation is shown. The image can also be flipped along a vertical axis.
The serial number, picture size and frame rate of the life image are displayed at the bottom of
the MEA-Monitor window.