MPM MZE-04 User Manual

Page 13

ATTENTION! When you will be ironing for the first time, a smoke can occur. It will disappear

after a while.

PREPARATION FOR USE

Filling the water tank in

1. Make sure that the iron is unplugged.

2. Set the steam controller into the (NO STEAM).

3. Open the cover of the water tank hole.

4. Use the fill cup in order to fill in the tank with the water, up to maximum level. Check the maxi-

mum level of the water – stand the iron in the vertical position.

5. Close the cover of the water tank hole.
ATTENTION! Do not exceed the Max indicator. Use distilled water.
6. Plug the iron into a grounded socket

Setting the Temperature

1. Stand the iron in vertical position and set a desired temperature for ironing, by turning the tem-

perature controller into relevant position. Work status light will shine.

ATTENTION! Study a required temperature on labels of clothes you intend to iron.

– ●

Artificial fibers (e.g. acryl, nylon, polyamide, polyester)

– ●●

Wool

– ●●●

Cotton

–

„MAX” Len Len