MPM MWA-01 - Manual (Page 7)

GB
APPLIANCE USE
1.. Position the scale on a dry and stable surface and make it sure that its position is stable
(any carpets and other soft surfaces should be avoided)
2. The appliance is immediately ready to use. Enter onto the scale and perform the
measurement of body weight
3. The weight of body should be distributed on the scale when anybody is standing on it.
The correct weight will be indicated on a display (2).
4. The appliance will be switched off automatically after about 8 seconds after its leaving
without any repeated weighing cycle.
Attention: In case of scale overload (above 180kg) a message (Err) will be displayed on the
display. If the replacement of batteries is required, a message (Lo) will be displayed on the
display.. Any discharged batteries should be removed from the appliance and replaced by
the new once. The old batteries should be handed over to a specialized recycling company.
Always use the same type of batteries.
CLEANING AND MAINTENANCE
Clean the scale using slightly moistened cloth. Do not immerse in water. Do not use any
chemicals or scratching detergents. After cleaning allow to cool completely.
2
1
5
4
3
MWA-01 instrukcja.indd 7 2009-10-20...11:54:12