Important – MotorVac CarbonClean System II LE-1 User Manual
Page 31
Overview
1998 MotorVac Technologies,
xxx
11.
DO NOT ALLOW CIS VEHICLES TO RUN OUT OF FUEL. TURN OFF THE VEHICLE’S
ENGINE BEFORE COMPLETION OF THE RUN CYCLE.
12.
Turn
the
Pressure Adjust
regulator counterclockwise on the unit to release residual pressure.
IMPORTANT
Wrap a shop towel around pressure fittings before
disconnection to protect against residual fuel
spray.
13.
Disconnect the battery leads, hoses, and adaptors. Return the vehicle's fuel system to its normal
operating condition by re-connecting the vehicle's fuel lines.
14.
Re-install the vehicle's gas cap.
15.
Start the vehicle
and verify that there are no leaks.
16.
Test drive the vehicle for five kilometers immediately following the cleaning service to flush all
detergent from the vehicle's fuel and exhaust systems.