MotorVac TRANSTECH-1000 - Manual (Page 12)

Transmission Service Procedure
Follow the steps below to service the Transmission thru the dipstick tube.
IMPORTANT
Do not perform the transmission service if the
vehicle’s engine oil or coolant level is low.
If necessary, add motor oil and/or coolant.
Do not perform service if new transmission fluid
is below 50 degrees Fahrenheit.
/!\ WARNING
Flammable Liquid can squirt out of pressurized lines when connecting or disconnecting.
Verify that engine and machine are both off before connecting or disconnecting
cooler lines or adapters.
Wear safety goggles.
Wear chemical resistant gloves when connecting or disconnecting fittings and
adapters.
Wrap a shop towel around pressure fittings and adapters when disconnecting.
Avoid exposure to flames, sparks, hot engine parts, and other ignition sources.
Explosion or flame or exposure to flammable liquid and vapors can cause injury.