Aussie Vantage LP 6703C8FKK1 - Manual (Page 12)

12
To reduce the risk of a laceration hazard:
• Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp.
CAUTION
!
Step 13
Warming Rack / Flame Diffuser / Cooking Grid Assembly
A. Insert Warming Rack leg ends into holes on top edge of firebox. Seat securely.
B. Lay a Flame Diffuser from back to front over each Burner on the lower Body ridges. Place each Flame Diffuser in
the individual guides to keep from sliding.
C. Place the Cooking Grids over the Flame Diffusers on the upper Body ridges.
cooking grid
C
Step 14
Battery in Igniter Installation
Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten
securely.
Battery
AA 1.5v Alkaline
1 pc
This Completes the Grill Assembly.
+
-
A
flame diffuser
B