Mody Pumps MS 121 - Manual (Page 11)

RE- ASSEMBLY OF THE PUMPSET.
THE PUMP CAN BE RE- ASSEMBLED BY REVERSING THE ABOVE PROCEDURE. PLEASE HOWEVER
NOTE THE FOLLOWING:
• ALWAYS REPLACE ELASTOMER ELEMENTS.
• REPLACE LOCKING SPACER IF REQUIRED DURING RE-ASSEMBLY.
OIL SPECIFICATIONS
A) EXXON UNIVOLT 61
B) SHELL TELLUS 29.
C) CHEVRON SUPERLA 10 FDA APPROVED
USE NON-CONDUCTING, NON-FOAMING, NON-DETERGENT FDA APPROVED OIL ONLY
PLEASE NOTE THE SEAL CHAMBER CONTAINS APPROX. 0.7 LITRES OF OIL.
RECOMMENDED SPARES FOR TWO YEARS OPERATION:
SR. NO. PART NO. DESCRIPTION QTY.
1 535-031-00 MECHANICAL SEAL 2
2 535-024-66 “O” RING SET 1
3 260-034-66 CABLE GROMMET 1
4 260-016-66 CABLE LEAD GROMMET 1
5 020-002-07 UPPER BEARING 1
6 020-021-07 LOWER BEARING 1
7a 300-116-01 IMPELLER (60Hz) 1
7b 300-114-01 IMPELLER (50Hz) 1
8 720-015-80 WEAR RING 1