Mobi Technologies 70280 WallMate - Manual (Page 2)

Resetting
Unplugging the WallMate® turns it OFF and also RESETS it to come back on in the initial green mode. No matter where it is in
the sequence, if unplugged (or power is interrupted), the unit resets back to the same order when plugged in the next time,
and will automatically come on when the area light dims.
If you do not want it to automatically turn on after plugging in, you must cover the Light Sensor (D) so it lights up and then
sequense the Color Mode Button (E) to Off and leave it that way. Then you can either press the Color Mode Button again later
to turn it On or simply unplug it and plug it again to reset.
Note: Unstable power input can cause the internal lighting sequence controller to lock up. If that happens just unplug the
unit and plug it in again. This will reset the sequence controller.
Care
To clean the outer surfaces simply wipe with a lightly damp cloth WHILE UNPLUGGED. Do not spray or pour dripping liquids
onto any part of the light or get it wet in any way other than damp cloth cleaning as described.
Safety
Keep your WallMate® Color-Changing Night Light away from open flames or extreme heat. As described earlier, do not use
the light in any area where it can touch materials that might get caught between the power plug and the power socket.
Use only in areas that are dry and clean. Never plug any electrical product into circuits that would exceed the maximum
electrical load for its use.
Specification
Product Name: TykeLight® WallMate®
Model numbers: 70182
Dimensions : 4 x 5.5 x 3 inches
Weight: 3.6 oz
Power Requirement: 110-120 volts
Parts Included
WallMate® Color-Changing Night Light –– 1 pc
Instructions –– 1 pc
Limited Warranty
Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety
(90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi
Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will
be applied for replacement of parts or labor for repair. To obtain warranty service, please return the product to Mobi along
with a dated sales receipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies,
Inc. at the address indicated below and for all associated freight and insurance costs. This warranty does not cover damage
caused by accident, misuse, abuse, improper maintenance, unauthorized modification, or connection to an improper power
supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and
any liability other than what is stated above.
Mobi Technologies, Inc.
5913 Blackwelder Street
Culver City, CA 90232
www.getmobi.com
Mobi, TykeLight, and WallMate are trademarks of Mobi Technologies, Inc.
© 2013 Mobi Technologies, Inc. All Rights Reserved
rvsd 12/12