Mobi Technologies 70280 WallMate User Manual
Color-changing night light turn it on, Switching sequence, Change colors
Color-Changing Night Light
Turn it ON
Insert Power Plug (A) of Base (B) into an AC
Power Socket (C) making sure the plug is fully
inserted. Once plugged in, the unit is auto-
matically activated and ready, but the light will
only turn on when the area is dark enough.
To test it cover the Light Sensor (D) and the unit
will light up while the sensor is covered.
DO NOT PLACE THE LIGHT SO THAT IT
TOUCHES ANY BEDDING, PILLOWS, PLUSH
PRODUCTS OR OTHER OBJECTS THAT COULD
INTERFER WITH THE CONNECTION BETWEEN
THE POWER PLUG AND THE POWER SOCKET.
WALLMATE® IS NOT A TOY. AS WITH ALL
ELECTRICAL PRODUCTS ITS USE REQUIRES
ADULT SUPERVISION.
Switching Sequence
Change Colors
In low light levels the Light Sensor (D) allows the
WallMate® to light up when plugged in.
It initially comes on in GREEN and will stay green
until you...
Press the Color Mode Button (E) which will change
it to... Blue
Press the Color Mode Button again and it will
change to... RED
Press the Color Mode Button again and the
illumination will change to rainbow cycling
... MULTI-COLOR
Press once more and it turns... OFF.
Continuing to press and release the Color Mode
Button will sequence through the color modes
and to Off again in the order described above.
Item # 70182
rvsd 12/12