Asus Motherboard M2V-MX - Manual (Page 69)

ASUS M2V-MX 2-27
Hyper Transport AGP Configuration
(K8/NPT) to (NB) Freq Auto [Enabled]
Hyper Transport AGP Configuration
(K8/NPT) to (NB) Freq Auto [Enabled]
Allows you to enable or disable the K8/NPT to northbridge frequency
selection by CPU capability. Configuration options: [Enabled] [Disabled]
2.4.5 Onboard Devices Configuration
Serial ATA IDE Controler [SATA]
OnBoard LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
High Definition Audio [Auto]
Front Panel Support Type [HD Audio]
JMicron SATA/PATA Controller [Enabled]
JMicron SATA Controller Mode [IDE]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Serial ATA IDE Controller [SATA]
Allows you to disablel or select the Serial ATA controller mode.
Configuration options: [SATA] [RAID] [Disabled]
OnBoard LAN [Enabled]
Allows you to disable or enable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set
to Enabled. Configuration options: [Disabled] [Enabled]
High Definition Audio [Auto]
Allows you to disable or set the high definition audio.
Configuration options: [Disabled] [Auto]