Minuteman X Ride 28 Riding Extractor - Manual (Page 41)

41
Maintenance and Care
7.5.1 Fill solution tank
Fill solution tank (Fig. 12/1) before work
or as required. Park machine on level
ground. Open fill port (Fig. 12/4) and fill
tank up to the maximum (1/1 marker) on
the sight gauge (Fig. 12/2).
The solution temperature is
not to exceed 122
o F (50 o C).
7.5.2 Empty solution tank
Park machine such that the solution
tank drain hose (Fig. 12/5) is located
above the drain aperture in the floor.
Take tank drain hose from holder and
remove cap.
7.5.3 Solution Filter
Check solution filter at weekly intervals
and clean or replace if required.
Only clean solution filter when
the solution tank is empty.
1. Empty solution tank (Fig. 12/1), see
paragraph 7.5.2.
2. Unscrew filter cap.
3. Remove the filter element from the
filter case for cleaning. Replace if
required.
4. Re-install filter element and filter
cap.