Replacement of main broom – Minuteman Kleen Sweep 27M User Manual

Page 10

Text mode
Original mode

Replacement of main
broom

The broom roller bears 10 ea. rows of
alterned soft and hard bristles and
consists of two broom halves.
Width:

480 mm (18.9")

Dia.:

250 mm (9.8")

Dia, wear limit: approx. 180 mm (7.1")

The broom roller is replaced as
follows:

GSlue side broom up

GTilt machine back to rest on the

handlebar

Remove three ea. Phillips screws,
turn broom roller 180°, remove
Phillips screws from second half. Pull
the drive pin out of the broom shaft.
To install, reverse above procedure.