Minuteman EX12 Carpet Extractor User Manual

Page 9

Parts and Instruction Manual

Page 6

SYMPTOM:

HEATER IS NOT WORKING PROPERLY:

PROBLEM:

The back up sensor, mounted on the heater has popped.

SOLUTION:

Reset sensor by pushing in button.

PROBLEM:

Heating element is bad.

SOLUTION:

Replace element.

SYMPTOM:

VACUUM MOTOR IS NOT WORKING PROPERLY:

PROBLEM:

Hose not connected tightly to upholstery tool or machine.

SOLUTION:

Connect hose tightly.

PROBLEM:

Drain valve is not shut completely.

SOLUTION:

Close drain valve completely.

PROBLEM:

Vacuum tank lid is not on tightly.

SOLUTION:

Secure the vacuum tank tightly.

PROBLEM:

Ball float is shut off.

SOLUTION:

Empty the vacuum tank of all wastewater.

PROBLEM:

Water is coming out of vacuum motor.

SOLUTION:

Use a low foaming detergent.

PROBLEM:

Floor wand or is clogged with hair, carpet fibers and or debris.

SOLUTION:

Clean floor wand.

PROBLEM:

Ball float is not installed correctly.

SOLUTION:

Make sure that ball float is firmly installed on the elbow.