Service and calibration – Meriam M2 – Series Smart Manometer User Manual
Page 37
31
Service and Calibration
If the M2 cannot be zeroed, recalibrated or is damaged, it must be
returned to the factory for servicing. In this case, contact the
Meriam Process Technologies representative in your area or call
the factory at the numbers listed below for a Return Material
Authorization (RMA) number.
DO NOT send any unit in for service without first contacting
Meriam for a Return Material Authorization (RMA) number. If
this number has not been obtained and clearly marked on the
return packaging, th
e unit will be returned at the shipper’s
expense. An RMA number will be provided by the Meriam Repair
Department when you call, fax or e-mail your information.
Certification for Non-Hazardous Materials will also be required.
The RMA number must accompany all incoming packages to
insure proper tracking, processing and repair work.
To assist us in processing your service request, please have the
Model & Serial Number of the unit available when you call. This
information is located on the product label.
Meriam Process Technologies
10920 Madison Ave.
Cleveland, OH 44102
Ph. (216) 281-1100 FAX (216) 281-0228
Web