MAX RB397(CE) - Manual (Page 15)

16
(1) After you have recharged the battery pack,
remove it from the charger.
(2) Unplug the charger power cord from the wall
socket.
Regarding tying times per charge, a brand-new
battery ties approximately 2000 times per
charge. The tying times per charge will be de-
creased gradually by repeated re-charge until
the Battery becomes unusable. The tying times
per charge depend on temperature and the Bat-
tery condition.
• When the battery pack is fully discharged, do
not leave it for a long time without recharging.
If the fully discharged battery pack is removed
from the system and left for a long period of
time, the battery pack may become damaged.
Recharge the battery immediately when it has
been discharged.
• Do not leave the battery pack on the charger.
If the above is not observed, a weak current
will continue to flow and the battery pack may
become damaged. When recharging is com-
plete, always remove the battery pack from the
charger.
Battery pack breakdowns
If the following conditions occur, bring the Bat-
tery and Charger to your dealer.
• The red charging lamp does not flash when the
charger plug is inserted into main power
source outlet (When the Battery pack is not in-
serted in the charger).
• Neither the red charging lamp nor the orange
standby lamp lights or flashes when the Bat-
tery pack is inserted in the charger.
• The orange standby lamp does not change to
the red charging lamp even after more than 1
hour.
• The red charging lamp does not change from
constant to flashing light even after more than
90 minutes. (except at low temperatures)
CAUTION