Altinex Multi Tasker MT107-301 - Manual (Page 4)

MULTI-TASKER™
3
ABOUT YOUR MT107-301/305/306 2
MT107–301/305/306
8 BNC OUTPUTS 450MHz
The MT107-301, MT107-305 and MT107-306 are
8 BNC Output expansion cards for use with the
MT107-100 64X64 Matrix Engine. All three cards
are designed to work with signal resolutions from
VGA through UXGA.
The MT107-301 is capable of driving Video and/or
SYNC signals. The MT107-305 drives Video
signals only and may be used with RGB, RGsB or
Composite Video signals. The MT107-306 is used
for driving SYNC signals of any type and has a
TTL output.
Each MT107-301/305/306 connects to the
MT107-100 Matrix Engine. A total of 7 output
expansion cards may be connected to the
MT107-100 Engine. Each card is connected via
specially provided with the Engine high bandwidth
video cables.
As part of the MT107-100 Matrix Engine, each
MT107-301/305/306 card has signal detection
circuitry, which allows to determine presence of
signal on any output.
Altinex's software and hardware allow for the
switching of any input to output combination and
prevents illegal switching combinations that may
damage components.
TECHNICAL SPECIFICATIONS 3
FEATURES/
DESCRIPTION
MT107-301/305/306
GENERAL
Outputs
8
Output Connectors 8 BNC Female
Compatibility
Signal types
–301: RGBHV, RGBS, RGsB,
Composite Video, Sync
–305: Composite Video, RGB,
RGsB
–306: Sync
Signal resolution VGA through UXGA
Table 1. MT107-201 General
MECHANICAL MT107-301/305/306
Enclosure Slots Required 1 Slot per Card
Weight 0.4 lb (0.2 kg)
Connector Panel Black Anodized
T° Operating 10°C-50°C
T° Maximum 75°C
Humidity 90% non-condensing
MTBF (calc.) 38,000 hrs
Table 2. MT107-301/305/306 Mechanical
ELECTRICAL MT107-301/305/306
Video Output Signals R,G,B
Impedance Analog 75 Ohms
Analog Signal Level 1.5V p-p max.
Sync Output Signals H,V
Signal Level 3 - 5 Volts TTL
Bandwidth
Bandwidth
450 MHz @ -3dB
Table 3. MT107-301/305/306 Electrical