Magnum Venus Plastech PATRIOT 7 PAT-PH-7000 Series - Manual (Page 15)

PAT-PH-7000 Series Powerhead Manual
Rev. 05/2012 Page | 15
Introduction:
This manual covers the repair of the 7” diameter by 2” stroke length Patriot Powerheads:
• PAT-PH-7000 Patriot Powerhead Assembly
• PAT-PH-7000-CA Patriot Powerhead Assembly – Multi-Color
• PAT-PH-7000-D
Patriot Powerhead Assembly – Duo Unit
• PAT-PH-7000-HD Patriot Powerhead Assembly – Heavy Duty
• PAT-PH-7000-P
Patriot Powerhead Assembly – Putty
The Duo Unit powerhead (PAT-PH-7000-D) is also a heavy duty assembly – meaning it
uses the same parts as the HD version except for the tie rods.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself. The reassembly will require the use of
removable thread locking compound, Lithium grease (08465) and SUPERLUBE O-ring
lubricant.
During Disassembly . . .
As you disassemble the equipment, lay out the components in the correct order and
direction. This will help you to reassemble them. It is important to have a current
drawing for reference during repair.
Tools required:
• Medium Removable Thread Locking Compound
• Brown Grease (08465)
• Super O-ring Lube (SUPERLUBE)
• 7/16-inch Socket Head Wrench (08472)
• Hex Wrench Set (08469)
• 9/16-inch Wrench (08476)
• 12-inch Adjustable Wrench (08468)
• Flat Blade Screw Driver
• Snap Ring Pliers
NOTE: Before starting any service work, release fluid and air pressure
from system. Remove the two air lines from the air motor. The air
motor assembly does not have to be completely removed from the
system for service work.