Luna PHOENIX 1000 - Manual (Page 2)

PHOENIX TM is a trademark of Luna Innovations Incorporated.
©Luna Innovations Incorporated, Roanoke, VA
All rights reserved.
PHOENIX 1000
LTPNX1000 REV. 004 10/09/2012
ABSOLUTE MAXIMUM RATINGS AND NORMAL OPERATING CONDITIONS
PARAMETER MIN MAX UNIT
Storage temperature -40 +85 °C
Storage relative humidity 5 95 1 %
Operating case temperature range -5 +70 °C
Operating relative humidity 1 5 85 %
Optical reflection back into swept laser -15 dBc
Fiber output power 2 65 mW
1 Non-condensing
2 At maximum drive current of 350 mA
GENERAL OPTICAL AND SWEEP SPECIFICATIONS
PARAMETER MIN TYP MAX UNIT
C-band Tuning Range (mode hop free) 1515 1565 nm
Tuning Modulation Bandwidth (Mirror Motor) 500 Hz
Fiber output power 1 8 10 mW
Spectral line width 2 1.0 2.0 MHz
Side mode suppression ratio (nearest mode) 43 50 dB
Relative intensity noise -152 -145 dB/Hz
Source spontaneous emission -50 -43 dBc/nm
Polarization extinction ratio 20 dB
Optical isolation 40 dB
1 Fiber output power is typical at 250 mA drive current.
2 Phase noise distribution full width at half maximum with 0 V on PZT and 75V on mirror motor control inputs,
integrated over 1 ms.
CAUTION: Viewing the laser output
with certain optical instruments may
pose an eye hazard.