Lectrosonics A6U User Manual
Lectrosonics, Uhf antenna, Important

LECTROSONICS
33
32
31
21
22
23
24
25
26
27
28
29
30
after cutting to length.
Frequency Blocks
Colored sleeve
Black cap
20
581 Laser Rd NE
Rio Rancho, New Mexico 87124
(800) 821-1121 (505) 892-4501
Fax: (505) 892-6243
Web: http://www.lectrosonics.com
A6U
UHF Antenna
This is a full size cutting template. Lay the actual antenna on top
of this drawing and cut at the mark for the desired frequency group.
Install cap on end of antenna
Kits are shipped from the factory with caps of the various colors plus a black cap. After cutting the
antenna to the desired block length, select the properly colored cap and cut off the closed end to make
the colored sleeve. Slide the colored sleeve onto the antenna as shown above then slide the black cap
onto the cut end of the antenna.
FREQUENCY
ANT SLEEVE
ANTENNA
BLOCK
RANGE
COLOR
WHIP LENGTH
20
512.000 - 537.500
Black
4.98"
21
537.600 - 563.100
Brown
4.74"
22
563.200 - 588.700
Red
4.48"
23
588.800 - 614.300
Orange
4.24”
24
614.400 - 639.900
Yellow
4.01"
25
640.000 - 665.500
Green
3.81"
26
665.600 - 691.100
Blue
3.62"
27
691.200 - 716.700
Violet (Pink)
3.46"
28
716.800 - 742.300
Grey
3.31"
29
742.400 - 767.900
White
3.18"
30
768.000 - 793.500
Orange/Black
3.08"
31
793.600 - 819.100
Orange/Brown
2.99”
32
819.200 - 844.700
Orange/Red
2.92”
33
844.800 - 865.000
Orange/Orange
2.87”
The sleeve color follows the standard resistor color code for the second
numeral in the group number.
*IMPORTANT
Whip Length
Measure the length of the whip that protrudes outside of the SMA connector.
m-a6u.pmd 0202