Specifications and features – Lectrosonics UH100 User Manual

Page 8

SPECIFICATIONS AND FEATURES

Operating frequencies:

537.6 to 588.7 MHz, 614.4 to 793.5 MHz

Frequency selection:

256 frequencies in 100kHz steps

RF Power output:

100 mW (nominal)

Frequency stability:

± 0.002%

Deviation:

± 20 kHz (max)

Spurious radiation:

90 dB below carrier at frequencies less than 1GHz

Equivalent input noise:

-126 dBV

Input level:

Nominal 2 mV to 300 mV, before limiting.
Input greater than 2V, with limiting.

Input impedance:

1K Ohm mic load impedance

Input compressor:

Soft compressor, >30 dB range

Gain control range:

43 dB; semi-log rotary control

Modulation indicators:

Dual LEDs indicate modulation level 12 dB below limiting and at
the onset of limiting.

Controls:

2-position “OFF-ON” slide switch. Control panel knob adjusts audio
gain. Rotary switches on side panel adjust transmitter frequency.

Audio Input Jack:

3-Pin XLR

Battery:

Precision compartment auto-adjusts to accept any known alkaline
or lithium 9 Volt battery. (We’ve tried 150 different ones!)

Battery Life:

5 Hours with alkaline 9 Volt, 12 hrs with lithium

Weight:

6.6 ozs. including battery

Dimensions:

1.5 x 1.5 x 4.2 inches

Emission Designator:

180KF3E

Specifications subject to change without notice.