Specifications and features – Lectrosonics M187 User Manual

Page 12

SPECIFICATIONS AND FEATURES

Operating frequencies:

150 to 216 MHz

RF Power output:

50 mW

Deviation:

±15kHz (max)

Spurious radiation:

55 dB below carrier

Equivalent input noise:

-126 dBV

Input level:

Nominal 2 mV to 300 mV (before compression)
30 Volt max. input level (including limiter)

Input impedance:

Selectable for 500, 1K, 10K Ohm

Input compressor:

Soft compressor, 35dB range

Gain control range:

43 dB; semi-log rotary control

Modulation indicators:

Dual LEDs indicate modulation level and onset of limiting

Controls:

3 position “OFF-MUTE-ON” for noiseless operation
Front panel knob adjusts audio gain

Audio Input Jack:

Switchcraft 5 pin locking (TA5F)

Antenna:

Dipole radiator formed by mic cord shield and
transmitter housing

Battery:

Precision compartment auto-adjusts to accept any known
alkaline 9 Volt battery (We’ve tried 107 of them!)

Weight:

5.3 ozs. including battery

Dimensions:

3.1 x 2.4 x .75 inches

Emission Designator:

54KOF3E

Specifications subject to change without notice.