Lectrosonics DR175NC - Manual (Page 8)

SPECIFICATIONS AND FEATURES
Operating frequencies:
Sensitivity:
Signal/noise ratio:
Squelch quieting:
AM rejection:
Modulation acceptance:
IF Selectivity:
Third order intercept:
Diversity technique:
Audio outputs:
Antenna inputs:
Controls:
Indicators:
Power requirements:
Power consumption:
Weight:
Dimensions:
150 to 216MHz, crystal controlled
-110dBm for 20dB Sinad (0.7uV)
96dB flat; 99dB A-weighted
Greater than 109dB
Below the noise at all input levels
Greater than ±15kHz
150kHz interference bandwidth
-30dB @
±200kHz
+5dBm
Dual receiver "opti-blend" audio combining
XLR: 200 Ohm bal.; 100mV max.
Dual BNC female; 50 Ohm impedance
• Front panel attenuator controls balanced outputs
• Power switch
• Red LED for power "ON"
• Dual modulation LEDs show transmitter audio
level
• Dual "opti-blend" LEDs display mixture ratio
• 12V DC (rear panel jack)
• 110V AC (using supplied CH-12 AC adapter)
170mA max
10.1 ozs
3¼" wide, 1¼" high, 5¼" deep
8