L-com HG5824D - Manual (Page 2)

IP-00034 Rev. B – 05/05 Page 1/1
1. Attach antenna Feed Horn and L-Bracket to dish
using included hardware (see below).
2. Secure antenna assembly to mast using U-Bolts,
Clamp and hardware. (Note: Only one U-Bolt is
required when using tilt feature of L-Bracket)
Antenna can be mounted in a tilt position. See
Below for mounting options.
U-Bolt
Feed Horn
Dish
Installation Instructions
Models: HG5824D, HG5423D
Rear View
Installation Note: The Feed Horn can be oriented
for either vertical or horizontal polarization. A small
arrow on the tip of the feed horn indicates direction.
L-Bracket
Clamp
L-Bracket
Mast
L-Bracket shown for down-tilt mounting. For up-tilt,
rotate bracket 180 degrees when attaching to antenna.
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.