L-com HG2419G User Manual
L-com Accessories communication
IP-00017 Rev. C – 05/05 Page 1 of 3
Installation Instructions
Models: HG2415G and HG2419G
Antenna Components Included:
(2) Antenna Grid Section Halves
(1) Antenna Feedhorn Assembly
(1) Feed Reflector
(1) Small Self-tapping Screw
(2) Mast Clamps
(1) Aluminum “L” Bracket
(8) #M5 Machine Screws w/nuts, flat and lock washers
Antenna Assembly Instructions:
Assemble the halves of the Reflector Grid using
(4) #M5 machine screws with lock washers, flat
washers and nuts as shown.
Reflector Grid
Lock Washer & Nut
Install the Feed Reflector to the front of the
Feedhorn using the small self-tapping screw.
Feed Reflector
Feedhorn
Small Self-Tapping Screw
#M5 Machine Screw
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.