AT&T 8410 - Manual (Page 8)

8 Issue 1 March 1996
To place a call using an automatic dialing button, do the following:
1. Go off-hook.
■ You hear a dial tone.
2. Press an assigned Automatic Dialing button.
■ You hear a ringback tone.
■ The called number is displayed.
Personal AD Lists 0
To program a personal AD list item, do the following:
1. On a sheet of paper, write down the phone numbers and feature access
codes you want to store.
2. Go off-hook.
■ You hear a dial tone.
3. Do one of the following:
a. Press , and then press Prog .
b. Press .
c. Dial the AD Program feature access code _____.
■ You hear a dial tone.
4. Dial the personal list number (1, 2, or 3).
■ You hear a dial tone.
5. Dial the list item (1, 2, 3, and so on).
■ You hear a dial tone.
6. Dial the phone number or feature access code you want to store (up
to 24 digits).
Menu
Program