CTX Virtual Technologies The VK200 KEYFOB Virtual Keyboard User Manual

Page 20

5.2 CONNECTING VIA USB

This device is compatible with all USB HID capable

operating systems. USB HID connection allows plug-

n-play without installing a separate driver.

1. Connect VK200 KEYFOB

and host device using

supplied USB cable. Host device must support USB

HID. Note: Most Windows devices support USB HID.

2. Turn on VK200 KEYFOB

3. Display Screen of the VK200 will have the U

displayed. If no U is displayed please check the
connection.

BLUETOOTH PRIORITY OVER USB

Bluetooth has priority over USB. If Bluetooth is

connected and a U is displayed and flashing then

click FN and B or use the menu system to turn

Bluetooth off allowing USB HID to take over.