Controlled Products Systems Group 1838-080 - Manual (Page 47)

1838-065-G-12-06
5.3 LOG TABLES
Complete the information in the tables on the following pages to maintain a record of the information
that has been programmed into the access control system if the system IS NOT being programmed
from a PC. If PC programming is being utilized, there is no reason to maintain these log sheets since
the PC will maintain a complete record of the information that has been programmed.
Make copies of the user log sheet so that you have enough to complete a listing of all users and data.
Enter the information as shown in the example below. DIR is the user’s unique directory code and
can be 1 to 4 digits (3.4.1). Enter the user’s four-digit entry code (3.6.1) in the ENT field if they are
used. Enter the user’s unique device code (3.5.1) in the DEVICE field if access control devices
(Transmitters, cards, etc.) are used. Enter the SEC LEVEL (Security Level), FL (Floor), and ER
(Elevator Reference) numbers as required.
NAME PHONE # DIR ENT DEVICE SEC LEVEL FL ER
Smith, John 765-0000 173 3812 04231 02 14 2
MASTER CODE (3.2.1) RELAY STRIKE TIME (3.3.1)
RELAY 1 RELAY 2
TONE OPEN NUMBERS (3.3.3) RELAY 1 RELAY 2
MOMENTARY ACTIVATION
CONTINUOUS ACTIVATION
RELEASE
ACTIVATE 1 HOUR
POSTAL SWITCH ACTIVATES (3.3.3)
RELAY 1 RELAY 2
ENTRY CODE RANGES (3.7.3) RELAY 1 RELAY 2
LOW BOUNDRY
HIGH BOUNDRY
Page 47