Altec ISDN Socket Modem AL5068S-3V - Manual (Page 24)

AL5068S Designer’s Guide
No. AL5068S-E00-105 Altec Electronic AG Seite 24 / 25
6.3 Considerations for EMC
6.3.1 EMC Compliance (EU Countries)
The Socket Modem has been assessed with respect to emission of and immunity to
electromagnetic disturbances and has been found to comply with the relevant harmonized
standards as defined by the European EMC Directive (89/336/EEC).
These standards are:
• Generic emission standards which refers to
EN 55022:1998 +A1:2000, Class B
• Generic immunity standards which refers to
EN 55024:1999
6.3.2 Installation in Host Systems (European Countries)
It is assumed that the Socket Modem will only assembled in host systems that comply with
the EMC Directive.
As per definition of the EMC Directive, the card and its host system will constitute an
"installation" similar to e.g. a PC card modem installed in a personal computer. Therefore, if
the host system complies with the EMC Directive, there should be no need for verifying
continued compliance of the complete system.
However, note that it is the responsibility of the professional installer of Socket Modem to
ensure that the complete system placed on the market complies with the Directive.