Codelocks CL290 Mortice Latch Back to Back - Manual (Page 2)

1. Front plate (key override option shown)
2. Back plate
3. Neoprene seals x 2
4.
Spring loaded spindle
5. Deadbolt (60mm backset)
6. Keeper plate
7. Wood screws x 4
Use with deadbolt & keeper plate
8. Deadbolt support post
9. Tweezers (for changing the code)
10. Fixing bolts 3 supplied (spare x1)
11. Spare code tumblers x 2
12. Code card
13. 2 keys - key override models only
Tools required for installation
Power drill
25mm, 15mm & 8mm drill bits
Bradawl
Philips screwdriver size 2
Chisel (maximum 25mm)
Hammer/Mallet
Stanley knife
Adhesive tape
Pencil
Tape measure
You are advised to familiarise yourself with the
instructions before starting work.
NB – Your door is Right Handed
if, from outside, the hinges are
on the right.
To enable LOCKING of the bolt
from the outside WITHOUT
using the code:
Press the C button to reset the
chamber and place the lock case on
a flat surface with the buttons down.
Remove the code chamber plate held
in place with the two red screws.
With the tweezers remove the
right-hand pin for right handed
doors, or the left-hand pin for
left handed doors.
Replace the cover plate.
The outside knob will now feel
loose and turn freely in one
direction, and will require the code
to be used before it will turn in the
other direction.
NB When installing the lock make
sure that the driver is in the correct
position before installing the
spindle.
Leave this pin
for left handed doors
Leave this pin
for right handed doors
Before commencing installation check that all parts are
working correctly – press the code according to the code
card and then the knob should turn and return easily under
spring pressure. If you have a key override lock try the keys
to ensure that they turn in the knob handle.
If you intend to change the code, you should do it, if it is
convenient, before installing the lock – see the code change
instructions in the separate leaflet.
Check that the deadbolt moves freely by turning the flat
spindle in the cam.
From outside the code is required both to lock and to
unlock the bolt. If you would like to be able to LOCK your
door from outside WITHOUT using the code then follow
instruction 1.
SPECIAL NOTES Mortice Deadbolt CONTENTS 1. OUTSIDE KNOB LOCKING ACTION T E M P L A T E