CNB V5760P User Manual
Guide pattern, Vandal, Resistant
INS T ALL A TION
This manual explains the installation and operating method
for the color dome camera. Before installation, make sure
you are familiar with this product's special features and
proper operating technique.
DIMENSIONS(mm)
Surface Mount
Flush Mount
OWNER'S MAN UAL
DOME CAMERA
MOUNTING SCREW
GUIDE PATTERN
Guide Pattern
L-Wrench(Su rface type)
TROUBLE SHOOTING
If you have troble operating your camera, refer to
the following. If the guidelines do not enable you to solve
the problem, contact an authorized technician.
Video/Yellow
Power/Red
(DC 12V/ Power Type)
Function
Terminal Color
Video Output
Power Input
Yellow
Red
COMPOSITION
Surface Mount
Flush Mount
Check the power sou rce for the monitor and came
ra
and assu re that the voltage and polari ty a re p roperly
connected and being suppli ed correctly.
Check if the lens is stain
ed.
If di rty, clean the lens with a so
ft, clean cloth.
Adjust the Back Focus of the lens again.
Check if you h ave connected the came ra to a p roper
power sou rce and if the re is no p roblem with the
power, turn the unit o
ff imm ediately and s eek assis
-tan ce from our A fter Se rvice depa rtment.
Check if the came ra is pointed towa rd the sun or
a fluo rescent lamp.
Adjust the angle or l
ocation of the came ra if t oo much
light is comming into the sc reen.
BASE HOUSING
EYEBALL
CAMERA
STOPPING RING
DOME COVER
MOUNTING
SCREW
GND
Video Output
GND
Power
(+)
The image on
the
screen is dim.
The c amera does not work
properly, the su rface of the
camera case is hot,
and
a black line appe
ars on
the sc reen.
The sc reen blinks a lot.
CONNECTION
Theimage doesnotappe ar
on the sc reen.
Design and specifications are
subject to change without notice.
Vandal
Resistant
Vandal Resistant
Dome
Camera
E
Y
E
B
A
L
L
E
Y
E
B
A
L
L
O
WNER'S
MAN U AL
Full Eyeball Camera Angle Adjustment
FIXING
SREW
Using the "guide pa ttern" as a template, cut a
round o pening it
the wall or
ceiling.
Using the th ree mounting sc rews, a ttach the base housing on the hole.
Swivel the came ra to the desi red view and tighten the stopping ring
with the fixing sc rews.
Put the dome cover over the base housing and turn it cl
ockwise by hand.
Using the "guide pa ttern" as a template, cut a
round o pening it
the wall or
ceiling.
Using the th ree mounting sc rews, a ttach the base housing on the hole.
Swivel the came ra to the desi red view and tighten the stopping ring
with the fixing sc rews.
Put the dome cover over the base housing and turn it cl
ockwise by hand.
Tigthen the dome
cover with the fixing sc
rew.
2
4
.0
3
1
.5
4
.5
6
0
.0
Ш57.1
Ш94.9
Ш57.1
2
4
.0
5
.0
2
8
.0
5
7
.0
54.6
70.1
6
0
.8
4
7
.3
Ш81.0
Ш5
8
Ш5
8
PRECAUTION
All the warnings and instructions of this manual should
be followed.
Remove the plug f rom the outlet before cleaning. Do not use liquid
aerosol dete rgents. Use water dam ped cloth for cleaning.
Do not a ttempt to se rvice this unit yourself as o pening or removing
covers may you to dange rous voltage or other ha zards. Please refer
all se rvicing to qualifi ed se rvice personnel.
During flashes of lightning or c
racks of thunder, or when the
system
is not us ed for a long time, unplug the
system power supply to
protact the unit f rom lightening or
power su rges.
Keep enough spa ce a round the unit
for ventilation.
Slots and o penings on the monitor should not
be bl ocked.
To reduce the risk of fi re or el ectric sh ock, do not ex pose this applian ce
to rain or moistu re.
Do not pla ce a nything on top of the unit that might spill or
fall into it.
USER INFORM
A TION
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
P ARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral traingle,
is intended to alert the user to the presence of un-insulated"dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral traingle, is intended to alert the
user to the presence of important operating and maintenance-(servicing)
instructions in the literature acompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ON THE BOTTOM OF THE SYSTEM.
"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN
OR MOISTURE"
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPECIFIC
A TIONS
Signal S ystem
Scanning S ystem
Scanning F requency(H)
Scanning F requency(V)
Image Sensor
Total/E ffective Pixels No.
S/N Ratio
Resolution
Vid eo Output Levels
Lens
Sync. S ystem
Min. Illumination
Electronic Shu tter
White Balan cce
Gain Cont rol
Input/Output Conn ector
Suppli ed Voltage
Power Consumption
Dome Si ze ( Ø)
Weight
NTSC : 525 Lines
15.734kHz
59.94Hz
410K/380K [ Nomal:270K/250K ]
Auto ( AWB)
Auto ( AGC)
58mm
Model
NTSC
PAL : 625 Lines
2 : 1 Interla ce
50Hz
15.625kHz
1/3 inch SONY Su per HAD CCD
470K/440K [ Nomal:320K/290K]
More than 48dB
480 TV Lines / 380
TV Lines
1.0 Vp-p (75 Ohms, composite)
Fixed Lens: f=3.8mm( Basic), 2.45mm, 2.9mm, 6mm, 12mm(Option)
Internal
0.3 Lux ( 480TVL) / 0.1 Lux (380
TVL)
1/60s
1/10,000s
Power (R ed Jack), Vid eo (Yellow Jack)
9V DC
15V DC (R
ecommendation 12±0.5V DC)
150mA (Max. 1.8W)
Approx. 215g
PAL
P/N: 3810-0123A (ver.0708E )
1/50s
1/10,000s
VANDAL
RESISTANT
CAMERA
VANDAL
DOME
RESISTANT
CAMERA
DOME