CNB IXP3035VR - Manual (Page 19)

XNET User Manual
19 / 52
ITEM DESCRIPTION
Maintain
Server
Restart Restarts the system. It takes about 45 seconds.
Light Default
Resets all parameters except for TCP/IP settings.
This restore will be followed by a 45 seconds system reset.
Factory Default
Resets all parameters to Factory Default setting.
This will be followed by a 45 seconds system restart.
Delete Log
Files
Delete Logs Delete all saved Log Messages.
Backup Backup
This saves current camera’s configurations to Client PC as a file
(xnetconfig.dat).
Back up file can be restored to other XNET cameras.
This will be followed by a 45 seconds system reset.
Restore Restore
This loads up settings from a saved Backup file.
Click restore button after selecting backup files in Client PC. Optional
check boxes can be used to select settings to be excluded from the
restore process.
『
except TCP/IP & HTTP parameters』
『 except Camera Condition parameters』
『 except Users parameters』
『 except IP Filter parameters』
『 except Motion Detection parameters』
This will be followed by a one-minute system reset.
System
Update
Update
Use this to update the system.
Select location of Update file in Client PC and click Update button.
This will be followed by one-minute system restart.
Upgrade File can be downloaded from http://www.cnbtec.com
Please do not disconnect power and LAN cable from
the XNET while the upgrade is in process. It might
cause a system error.