CNB NDE5055MF - Manual (Page 8)

XNET Network Dome Camera Installation Manual
8 / 22
Do not use the other power connector when powering up the product through PoE. The Product
is not covered under warranty when it is damaged by connecting both Ethernet power and 12V
DC power (or 24V AC power) to this terminal.
 Factory Reset
Press and hold for more than 3 seconds while power is on to recall factory default settings
 Network Cable
This Ethernet terminal connects to 100Mbps LAN through an RJ-45 cable. When optional PoE is used, the
power will be supplied from the Network Cable. Network cable of this product is not water proof
 SD CARD SLOT : Enables recording of video data to an external memory device upon occurrence of
an event. Please use less than 16 GB SD Memory.
Labeling
position
Write-protect
tab
Figure 2-1. SD CARD