CNB IGP1030 - Manual (Page 14)

14 / 18
XNET Network Box Camera Installation Manual
Enter the user name and password to bring up the web viewer page. The default id and password is “root”,
“admin” respectively. If you want to use a different HTTP port number from the default value, simply put a
colon and port number at the end of the IP address. (For example, enter the following address when
changing the port to 8080: http://192.168.123.100:8080)
(When using default IP address and port number) http://192.168.123.100
(When IP address and port number changed) http://IP address: new port number
If you forget the administrator’s password, “Factory Reset” is the only way to regain
access. However, since this will retrieve all default settings, you need to configure
the network settings using IP installer software again.
For security purpose, it is recommended to change the administrator’s id and password from
their default values. Please be careful not to forget them or expose them to others. Please refer
to
[Web Viewer Manual] for detail .