KT&C KVR-H Series - Manual (Page 15)

15
Daylight Saving Time Network connection icon
Emergency recording Sensor recording
Schedule recording Motion detection
Key lock status icon Video Loss
Auto sequence icon Record icon
Internet connection icon De-interlace icon
In order to use remote controller, the ID must be same both DVR and remote controller.
By assigning DVR ID, it allows the user to control multiple DVRs with one remote
controller.
[1] Check current system ID and can be changed by user. (Factory default ID: “0”)
Menu > Information > Remote ID (Range: 0 ~ 99 )
System ID must be configured on DVR system menu. It cannot change DVR system on
remote controller.
[2] How to use remote controller
ID must be identified between remote controller and system. Otherwise remote
controller cannot recognize DVR correctly.
Icon
How to setup the remote controller ID