Specifications, start-up and installation, Specifications, Pool start up – King Technology INSTANT FROG User Manual
Page 2

I
nstalling an INSTANT FROG
®
1
. Set reminder dial on the
INSTANT FROG
®
to
6 months from date of installa-
tion. Turn dial by hand or with
a coin if needed.
VAC PLATE
2.
Remove skimmer cover and skimmer bas-
ket handle if applicable. Insert the INSTANT
FROG
®
into skimmer basket. DIAGRAM A
3.
If using the INSTANT FROG
®
with a suction
side automatic cleaner installed through the
skimmer, it will be necessary to use a vac
plate that may come with the skimmer or auto-
matic cleaner. DIAGRAM B
Specifications
• For inground pools ONLY.
• Lasts 6 months once product is wetted.
• Easy to set reminder dial for product
replacement.
• Reduces chlorine use up to 50%*.
(With chlorinator or floater turn setting
down or use fewer tablets.)
Pool Start Up
1. Balance water according to the chart .
2. Shock pool
to remove all
contaminants.
(Follow
manufacturer’s
directions
.)
W
ATER
B
ALANCE
G
UIDELINES
pH: 7.2-7.8
Total Alkalinity: 60-120 ppm
Calcium Hardness: 150-400
Total Dissolved Solids: <1500
Stabilizer: 20-80 ppm
Free Chlorine: 0.5-1.0 ppm
DIAGRAM A
DIAGRAM B
See your dealer for the correct vac
plate model for your pool.
Place in
Basket
Thank you for purchasing the INSTANT FROG
®
.
With mineral pool care, your water will feel softer,
shine brighter while reducing chemicals and over-
all pool maintenance.
*Compared to the minimum EPA recommended chlorine level of 1.0
ppm for a stabilized swimming pool