beautypg.com

Connections, Power, Media converter • user manual english – INTELLINET NETWORK 506533 Fast Ethernet Media Converter User Manual

Page 2

background image

2

English

Media Converter • User Manual

English

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

Fast Ethernet Media

Converter, Model 506502, 506519 or 506526; or Gigabit Ethernet Media Converter,

Model 506533.

Media converters connect two

Ethernet networks over a longer

distance using fiber optic cable.

connections

Twisted Pair – RJ45

Connect the UTP port of the media converter to an RJ45 port on the network; e.g., to

an Ethernet switch. Cat5e or better cabling is recommended. Models 506502, 506519

and 506526 can be connected to 10 Mbps or 100 Mbps ports. The integrated auto-

negotiation feature ensures that the link is established at the best possible speed. The

Gigabit Media Converter (model 506533) can only be connected to a 1000 Mbps

Gigabit Ethernet port, however.
Fiber Optic

As shown above, two fiber optic cables need to be connected between two ideally

identical media converters. Make a connection from Media Converter 1 TX to Media

Converter 2 RX, and from Media Converter 1 RX to Media Converter 2 TX. Maximum

length and fiber cable specification depend on the model. (See Specifications.)

power

Plug the power adapter into the 5 V DC input jack on the media converter, then con-

nect it to a regular power outlet (90 – 265 V, 50/60 Hz). Only use the included power

adapter or one with matching specifications (output of 5 V DC, at least 1 A).

LeD

s

(F

ast

E

thErnEt

M

odEls

: 506502, 506519, 506526)

PWR — The power adapter is

connected when lit.

100M — 100 Mbps link on the

twisted pair connection when lit;

10 Mbps link or no link if unlit.

Link/Act (TP = RJ45; FP = Fiber) —

Active link when lit; data traffic when flashing; no active network link when unlit.

FDX/COL (for TP/RJ45) — Full duplex connection when lit; data collisions when flashing;

half duplex when unlit.

SD (for FP/Fiber) — Fiber optic signal is detected when lit; no signal when unlit.

Media Converter 1

Media Converter 2

RJ45

RJ45

TX

TX

RX

RX

OPTICAL FIBER

ETHERNET 1

ETHERNET 2

Twisted Pair

Twisted Pair