INTELLINET NETWORK 522595 16-Port Fast Ethernet Office Switch - Manual (Page 2)

2
ENGLISH
Fast Ethernet Office Switch • User Manual English
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS ™ Fast
Ethernet Office Switch, Model 522595. For specifications, go to
www.intellinet-network.com.
CONNECTIONS
Plug the female end of the power adapter
firmly into the IN jack and the other end into
an electrical outlet. Confirm that the power
LED is lit. NOTE: To ensure proper operation,
use only the included power adapter.
• 10/100 auto sensing ports automatically
detect optimal network speeds; supports
any combination of 10 Mbps or 100 Mbps network devices with full/
half-duplex operation.
• All ports on the switch support Auto-MDI/MDI-X functionality, so
crossover cables and uplink ports are not needed for connections to
PCs, routers, hubs, other switches, etc.
Cat5/5e UTP/STP cables provide optimal
performance; if a status LED doesn’t
indicate a link or activity, check the
corresponding device for proper setup and
operation.
LEDs
LED Status Operation
POWER On Power on
Off Check connection
10/100M On 100 Mbps connection
Off 10 Mbps connection
LINK/ACT On Valid port connection
Blinking Data transmitted/received
Off No link established