4 - installation – INTELLINET NETWORK 524827 GuestGate MK II Quick Install Guide User Manual

Page 4

- 4 -

Installation

This setup method assumes that a DHCP Server, such as a router, is present in
your network.

1. Connection to the Host Network
Connect standard RJ45 Network Cable to GuestGate’s HOST Port and to an
RJ45 port on your existing network (Ethernet switch port, Router switch port,
etc.).
Turn on GuestGate and verify that the network connection is active (HOST LED
must be lit on GuestGate).
NOTE: The startup process takes up to 60 seconds.

2. Connection of Guests
Using standard RJ45 Network Cable you can connect PCs, Notebooks, Ethernet
Switches, Hubs or Wireless Access Points to the Guest Ports of GuestGate. Each
Port has its own Status LED. Verify that the network connection is active on
each port you connect.
Alternatively you can connect to GuestGate wirelessly by connecting to the
Wireless network with the name of “GuestGate.”

12V DC power

input connector

Host port -

Connect this to

your network,

e.g., the router

Guest ports 1 – 4 for the

connection of LAN switches,

Access Points, Desktop PCs

and Notebook computers

Reset button.

Hold down

for 10

seconds to

restore the

factory

default

settings

Radio on/off

switch

enables or

disables the

wireless

function