INSTEON Hidden Door Sensor (2845-222) Manual - Manual (Page 6)

6
If you skip linking now, you can link
later using Five-Tap linking.
Test the Fit Drill the Hole
Link First Locate the Hole
Installation
As installing Door Sensor obscures its
set button, perform any linking now
before you install the sensor.
For linking instructions, turn to Page 9.
Find a location for Door Sensor in
either the hinge-side of the door frame
or the hinge-side of the door itself.
Higher is better for wireless range but
low will still work.
Clean out any wood shavings with a
vacuum and test fit the sensor. When
ready, insert the sensor into the hole
and fasten with the included screw.
Place masking tape over any surfaces
that may be marred by the drill chuck
and drill a 4-inch deep, ¾-inch diameter
hole. If drilling into the door, have an
assistant hold the door steady.
1 2
4 3
?
X
X
Installation of your Door Sensor is
now complete.