INSTEON Hidden Door Sensor (2845-222) Manual - Manual (Page 20)

20
Local Programming
Local Programming Features
Linking Mode Readies the module for linking to another INSTEON module. As linking is directional,
the first device placed into linking mode will become the controller in the controller/
responder relationship. The second device will become the responder. The device
automatically exits linking mode after a link has been made with another INSTEON
device.
Multi-Linking Mode Readies the module for linking to multiple INSTEON modules. The module will remain in
linking mode for 4 minutes or until the module’s set button is tapped. This mode is very
usefully for manually creating scenes.
Unlinking Mode Allows the removal of links from the INSTEON module. The device will automatically exit
unlinking mode after a link has been removed from another INSTEON device.
Multi-Unlinking Mode Allows the removal of multiple links from the INSTEON module. The device will stay in
unlinking mode for 4 minutes or until the device’s set button is tapped.
To move right, press and
hold the set button
To move down, tap the set
button
Status LED blinks green
Status LED double-blinks
green
Status LED blinks red
Status LED double-blinks
red
Local Programming is a visual representation
of the device’s settings. Many device features
can be configured using the flow chart. Some
devices have more options than others but the
programming wheel presents even the most
complicated devices with a straightforward,
navigable path.
Navigation About the Flow Chart
NEW
X