INSTEON Leak Sensor (2852-222) Manual - Manual (Page 5)

Page 5 of 7 Rev: 10/28/2013 8:11 AM
Specifications
General
Brand INSTEON
Manufacturer product no. 2852-222, INSTEON Leak Sensor
UPC 813922013078
Warranty 2 years, limited
INSTEON
INSTEON powerline mesh repeater No
INSTEON RF mesh repeater
No
INSTEON controller Yes
INSTEON responder No
Maximum links/scenes 400
Commands supported as
responder
On Group 1 (Dry) On Group 2 (Wet)
Heartbeat (Group 4)
Software configurable Yes
RF range Up to 150 feet (open air)
Phase bridge detect beacon No
INSTEON device category 0x10
INSTEON device subcategory 0x08 (915MHz RF frequency)
Mechanical
Mounting Place on flat surface where leak will occur
Case color White
Buttons 1, Set
Plastic Polycarbonate
Rubber Polyethylene rubber
Conductive Feet Corrosion resistant nickel plated bronze
Beeper No
Setup LED Yes, green
Dimensions Excluding antenna: 0.9" H x 3.6" W x 1.4 D (23mm H x 92mm W x 36mm
D)
With antenna: 3.7" H x 3.6" W x 1.4" D (93mm H x 92mm W x 36mm D)
Weight 3 oz (0.2 lb, 90g)
Operating environment Indoors
Operating temperature range 32-104°F (0-40°C)
Operating humidity range 0-90% relative humidity
Storage temperature range -4-158°F (-20-70°C)
Electrical
Battery One (1) AA lithium battery included
Voltage 1.5VDC
Retains all settings without power Yes, saved in non-volatile EEPROM
Mean battery life
10 years
Certifications FCC, IC Canada