Hach-Lange DR 5000 brewerie analysis, supplementary software LZV570 - Manual (Page 21)

21
Working procedures
2.5.1 Procedure for measuring beer colour
1. Prepare samples as described in the working procedure.
2. Select STORED PROGRAMS in the “Main Menu”. Select test
number 806 .
3. Insert blank value cuvette (distilled water) into the cell
compartment. Close the cell compartment. Touch ZERO .
4. Insert the sample cuvette containing the prepared sample into
the cell compartment and close the cell compartment. Touch
READ . The result is displayed.
Note: Analysis of additional samples: Repeat working procedure from
point 4.
2.5.1.1 Executing the test with the sipper module
Information about the installation, module configurations and
sample introduction of the sipper module can be found in the user
manual of the DR 5000 Spectrophotometer (15.3.3. Installation
Sipper Module, page 133).