Hach-Lange LS 120 - Manual (Page 11)

English 11
Figure 1 Product overview
Product components
Make sure that all components have been received. If any items are missing or damaged, contact
the manufacturer or a sales representative immediately.
Shipped items:
• LS 120 shaker
• Plug-in power supply unit
• Non-slip mat
Installation guideline
Install the instrument:
• In a clean, dry, level, well ventilated, temperature controlled location
• In a location where the power switch and power socket are visible and easily accessible
because the plug-in power supply is used as a seperator in the case of a hazard
The instrument does not move with the suction cups installed. Make sure that the suction cups are
clean and free from damage. Use the supplied non-slip mat, if the suction cups lose their adhesion
on rough surfaces.
1 Power switch 3 Interface for plug-in power supply unit
2 Vibration unit
D A N G E R
Multiple hazards. Only qualified personnel must conduct the tasks described in this section
of the document.