Hach-Lange H-Series Meters Basic User Manual - Manual (Page 12)

Table 1 Keypad functions (continued)
Key Action H160G
H260G
H260GB
H170G
H270G
H270GB
H280G
H280GB
mV mode x x x
ISE mode x x x
TDS mode x x
Conductivity mode x x
Salinity mode x x
Calibration mode x x x
DO mode x
Setup mode x x x
Barometric pressure mode x
Time and date display x x x
Store a reading x x x
Recall a stored reading. x x x
Delete a stored reading. x x x
Scroll through values, setup screens and options. x x x
Set the backlight to on. After 2 minutes without a keystroke, the
backlight is set to off. x x x
Start/stop the data log x x x
Select an option, setting or value. x x x
Cancel an option, setting or value. x x x
12 English